Monday, April 25, 2011

Sharking In Japan Very Cruel

Options jig rigs in the nuances - Diverter leash.

In the last article dedicated jig snap-ins in the nuances tried to develop a theme «Texas rigging» (Texas Rig) how well it came out to judge you, we now move on and talk already directly on the "outlet leash" or as it is called "snap-Moscow».
BRIEF Classics.
It looks like this something like this: Go to the main fishing line (in my case, it is 0,2 mm) fit in medium-sized triple swivel. From the bottom of the ring is the so-called cargo leash 0.3 out of fishing line and a length of the 20-inches. Who - is doing more, but, in my opinion, it does not need it. From the side of the ring will go the same outlet leash. I do it from the 0.15 monofilament at length in the 1 - 1,5 meters. As experience shows works best is a long (lead), but besides that there is a comparable value "LENGTH RODS - long leash» , from which and is a start in the construction equipment, otherwise you will be inconvenient to operate, and overlaps torment. As the load I use olive, drop and less canister or tube. Weight will depend on you know on the test characteristics of the rod, in my case up to 10 grams. As for bait, then applied as twisters, and vibrohvosty mounted avsetnike, it is desirable minimum. Hence it is very high cross in zakoryazhennyh places.
wiring is carried out slowly by drawing on the bottom with pauses and podigrovkoy tip spinning. Most productive fishing on a cold water (especially in winter) on the low active bass. Come across the same way and sudachok and pickerel, but in the case of a toothy all ends, usually edged.
DISCHARGE OF LATERAL LOOP.
Such an option, I use more frequently than vertlyuzhkovy, for one simple reason. The thing that is mounted on a triple swivel leash has, it seems to me unnecessary twisting around its axis, which affects not always the best way to bite. In the loop snap this effect is absent, as well as no weight of the swivel snap that makes the most refined.
The loop is knitted directly to the main fishing line figure-eight knot as shown in the drawing. IMPORTANT: Trying to put the fishing line along the turns of each other without intersecting, to preserve the strength characteristics of the site.
wiring runs, as in the previous case.
INSTALLATION OF BALL with foam.
Again, the whole structure looks exactly the same, with the only difference is that on a leash with a needle stick krupnenky foam ball around millimeters 7. What is it? After experimenting as - that on the pond I used this particular snap, we find that after stopping the wiring (on hiatus) Twister starts very slowly not to go to the bottom, and vice versa emerge. Making at this time shot with the tip spinning without disruption of cargo from one point on the bottom, Silicone recalls how - that the insect that does not remain unnoticed and provokes an attack. Can be shown in the figure, put a little karabinchik for quick changing lures, most importantly not to overdo it with the weight and the size of the bait.
There is another BUT ... In this version, though bites and more, but more and idle, most likely a fish sees the ball, too, as a food item and about half of all attacks falls on him.
seiner

0 comments:

Post a Comment