Doctor Female For Penis

Making floats 2. The floats are made of white foam.

Zdryamsti everything! Remember the theme of making floats ? It was interesting to many, and many liked the idea put forward by a yellow foam. Here's the answer with its own experience in this case came from Anatolia Chelahova .

1.MATERIALY.

Photo 1.

Photo 2.

To produce floats I use two types of styrofoam, a very hard white and yellow with a life-belt. Just need the bamboo sticks barbecue (sold in the market), tubes for cocktails, glue (preferably so that it does not dissolve the foam), a colorless parquet lacquer (without hardener) and nail polish. You can use the sticks for the balloons, bamboo toothpicks, sticks for pens, etc. From the tool you need: an electric drill and a variety of sandpaper.

2.IZGOTOVLENIE.

Photo 3.

foam angled workpiece length equal height (future float) and the maximum width of thickest part of the finished product. Grab a piece of the triple electrode, wire or old small triangular Needle file and paste it in the drill. Drill vise. Needle file to dress neatly in the center of the workpiece. Include drill and sandpaper attach the desired workpiece we form a body float. Files can not be used because the workpiece can melt and go past the tip. Various forms of housing floats well described in the journal "Fisherman" № 3 in 1985. Then the glue (if it does not dissolve the foam) or lacquer plant the keel and an antenna.

Photo 4.

Then I cover 3 times the float with varnish. If a porous foam, then sanded the body and once again covered with varnish. This must be for protection from nail polish, which strongly dilutes the foam. Then paint the float and once or twice coated with varnish. After drying obtained by the floats, as in the photo 1,2,3. In addition, antenki on floats can do semnymi that they are more visible in all weather conditions and lighting as in the photo 4.

3.POPLAVKI WITH VARIABLE OGRUZKOY.

Photo 5.

On these floats wrote in his commentary on Related "with fishing rods for carp" Vitaly Melnik. It floats with detachable antenna. In the hole into which is inserted into the antenna, backfilled pellet in an amount Equal load float.
for their manufacture, I drilled in the hull float 5mm drill. channel of length 55-60mm. In this channel and filled polugrammovye pellet and close the top

Photo 6.

antenkoy. It is (the channel) I put a piece of duct for cocktails and I plant it on the nail. This is to ensure that the water accidentally falls inside the float. You can not embed it, but then the channel to a few times fluff with varnish. I made the four float various capacities (photo5, 6). They are comfortable yet that antenki they have the same length, and vershinki also removable. This allows me to fits on any float any antenna with any vershinkoy or fireflies, depending on visibility and time. Now, when the same shipment at the bottom I put the float of any duty by simply removing the pellet. As an adapter, I sat down on a piece of foam antenna on varnish and sandpaper make it fit the hole. Then he opened the varnish.

Anatoly foreheads.